Na sklade > 5 ks
You no longer have to worry about when you'll have time to clean—the Dreame L40s Pro Ultra will do it for you and make sure nothing needs to be redone. The robot automates vacuuming, mopping, and equipment maintenance, taking control of your daily cleaning routine. It offers up to 19,000 Pa of suction power, recognizes the type of dirt and surface, lifts mop pads on carpets, and selects the operating mode for the specific task itself. Its operating time of up to 170 minutes allows for thorough cleaning. The DuoBrush system effectively eliminates tangled hair, and the PowerDock station provides up to 100 days of maintenance-free operation. The device easily navigates thresholds, works effectively even in dark rooms, identifies over 180 types of obstacles, and supports maps of up to 4 floors. You can control its operation using voice commands or an app.

With a suction power of up to 19,000 Pa, it effectively removes both fine dust and larger debris such as pet hair, gravel, food scraps, and paper scraps. The Dreame L40s Pro Ultra cleaning robot can handle vacuuming hard floors and long-pile carpets. The 6th generation TurboForce motor not only increases efficiency but also significantly reduces noise levels. Airflow has been optimized to ensure maximum efficiency at lower noise levels, which is especially important for longer cleaning cycles. Particle collection efficiency reaches 100% and hair removal efficiency reaches 99.99%, leaving floors spotlessly clean.

The HyperStream™ Detangling DuoBrush system consists of two interlocking brushes with an aerodynamic design that effectively collects strands up to 30 cm long. As a result, you don't have to clean the brushes after every cleaning session – the robot works efficiently and your role is reduced to a minimum.

The Dreame L40s Pro Ultra is equipped with a side brush and mop pads that extend up to 4 cm, allowing it to clean effectively along walls, edges, and under furniture. The EasyLeap™ system allows it to overcome obstacles such as thresholds, skirting boards, slippery kitchen tiles, and sliding door guides. In addition, the robot easily crosses two-step thresholds with a total height of up to 44 mm when the distance between the steps exceeds 3 cm. For single-step thresholds, the maximum permissible height is 22 mm. The robot uses a 3-step process – a dual laser detects the threshold, auxiliary wheels provide traction, and the main wheels lift it over the obstacle. The 4-wheel design also works well on wet surfaces – the device does not stop and does not require manual transfer between rooms.

The cleaning robot not only recognizes what is on the floor, but also what type of surface it is dealing with. The Dreame L40s Pro Ultra distinguishes between long-pile and short-pile carpets, yoga mats, bathroom rugs, and hard floors. Based on this, it adjusts the cleaning method – for example, it lifts the pads to 10.5 mm so as not to wet the carpet, or switches to a more intensive cleaning mode. The Smart Dirt Detection 2.0 system detects whether there is dry dirt on the floor, such as spices, shoe marks, or chocolate, or liquid dirt, including milk, drinks, or syrup. Based on this, it selects the appropriate cleaning method. After mopping, the level of dirt on the pads is also checked – if they are too dirty, the device returns to the station to rinse them before the next pass.

TripleUp technology allows independent control of the robot's three elements: mop pads, main brush, and side brush. This allows the Dreame L40s Pro Ultra to independently change its operating configuration depending on the situation. When it detects a carpet, it automatically raises the pads to a height of up to 10.5 mm to avoid wetting the fibers. When mopping hard floors, the brushes are lifted to prevent them from coming into contact with moisture and minimize the transfer of dirt. If the device encounters an area that requires both vacuuming and washing, it activates both systems simultaneously. This enables effective and hygienic cleaning without the need to manually switch modes or supervise the process.

The Dreame L40s Pro Ultra uses artificial intelligence to recognize the presence of people and pets. The robot can not only avoid bowls, litter boxes, beds, and toys, but also react in real time when a pet is in its path—it stops, avoids it, and returns to the missed area when possible. The animal and human detection feature works regardless of lighting conditions and does not require manual supervision. From the app, you can enable real-time preview and monitor where your pet is currently located, as well as observe the cleaning process.

The PowerDock™ station automates all stages of robot maintenance after the work cycle is complete. The mop pads are rinsed with hot water at 75°C using 20 spray nozzles and scrubbed with the integrated AceClean™ DryBoard system, which removes dirt and detergent residue. They are then dried with warm air, which reduces mold growth and neutralizes odors even in humid environments. Thanks to the automatic dispenser, detergent is added without the need for refilling each time. The system also ensures constant access to water – the station fills the robot's tank, ensuring continuous mopping. Dust goes directly into an integrated 3.2-liter bag, which allows for up to 100 days of cleaning without emptying. The entire process is fully automated and can be tracked in the app, including the status of fluid and filter consumption.

The Dreame L40s Pro Ultra creates detailed maps for up to 4 floors using the Pathfinder™ system. Built-in 3D structured light and AI algorithms enable it to recognize over 180 types of objects and adjust its route accordingly. This allows the robot to not only avoid collisions, but also move safely in complex and dynamic environments. Built-in LED lighting allows it to work in the dark, maintaining precision and maneuverability regardless of conditions.

When starting the Dreame L40s Pro Ultra for the first time, it is recommended to activate the Initial Deep Cleaning mode, which is used to thoroughly clean the space before starting daily use. The cycle begins with vacuuming, after which the robot returns to the station, empties the dust container, and prepares for mopping. Before starting the second stage, the mop pads are rinsed with hot water to avoid spreading dirt. The actual mopping is done with clean and warm pads. The entire process is designed to remove dirt that may have accumulated during renovations, moving, or a long break in cleaning.

The Dreamehome app allows you to manage every aspect of the robot's work, from scheduling to detailed mode settings. You can select specific rooms to clean, set the intensity of vacuuming and mopping, and schedule charging times outside of peak energy hours. You also get constant access to cleaning history, component usage, container fill levels, and filter status. A Smart Curtain Care feature is also available. It is also possible to remotely monitor the situation at home, including real-time viewing from the robot's camera. You can also operate the device using voice commands in English, French, German, Italian, Russian, and Korean.

| Model | Dreame L40s Pro Ultra (white) |
|---|---|
| Battery capacity | 5200 mAh |
| Suction power | 19,000 Pa |
| Dust tank capacity | 395 ml |
| Water tank capacity | 80 ml |
| Operating time | Up to 170 min |
| Mopping function | Yes (mop pads) |
| Self-cleaning function | Yes |
| Navigation system | LDS |
| Features | Automatic washing and drying of mop pads with hot air, automatic refilling of water and detergent, dirt recognition and cleaning strategy adjustment, overcoming two-step thresholds with a total height of up to 40 mm (22 mm for a single step), 4-level mapping, retractable mop pads and side brush, LED lighting |
| Filter type | EPA (E11) |
| Compatibility | Dreamehome app, Amazon Alexa, Siri, Google Assistant |
| Clean/dirty water tank capacity of the docking station | 4.5/4 l |
Máte skúsenosť s týmto tovarom ? Pomôzete ostatným pri výbere.